Hot Swap Replaceable Drive Modules
Drive module brackets can be made to fit any enclosure, for insertion in the front or rear. Drive elevations are modified to match any motherboard elevation so that drives connect accurately. We have adaptable brackets for any size 3.5 drive, 2.5 Drive or SSD.
1U Chassis Plug-In Drive Modules
Hot Swap drive Modules (Click on Image to See 8 More)
Grouped Photo 2
Grouped Photo 3
Grouped Photo 4
Grouped Photo 5
Grouped Photo 6/lightbox] Grouped Photo 7
We produce plug-in drive modules for any size, solid-state (SSD) or spinning media. Modules are design be be blind mate docking right to your motherboard. They can also support an interposer board if needed. A full 1U high drive module is perfect when used in conjunction with swappable fan modules. Slimmer profile drive modules may be used when fans are fixed mounted to the rear panel or positioned elsewhere.
3 Different 3.5″ Form-Factor Drive Modules
The vertical drive position in the bracket is adjusted (raised or lowered) to match and blind mate with the SATA connectors on your motherboard regardless of board thickness or elevation from the floor of the chassis.
2 Different 2.5″ Form-Factor Drive Modules
The vertical drive position in the bracket is adjusted (raised or lowered) to match and blind mate with the SATA connectors on your motherboard regardless of board thickness or elevation from the floor of the chassis.
2 Different 2.5″ Form-Factor SSD Modules
The vertical drive position in the bracket is adjusted (raised or lowered) to match and blind mate with the SATA connectors on your motherboard regardless of board thickness or elevation from the floor of the chassis.